150 m³/d Domestic Sewage with AAO+MBR: Zhongqiao Enlightenment Box-Type Units Commissioned in Iraq
In Iraq, where extreme heat, aridity and water scarcity coexist, a wastewater treatment system must handle more than water quality. It must survive summer temperatures above 45°C, frequent sandstorms, and a supply chain thousands of kilometres long. In 2026, Shandong Zhongqiao Enlightenment Environmental Protection Equipment Co., Ltd. delivered three Zhongqiao box-type integrated sewage treatment units plus one equipment storage container to a project in Iraq — 150 m³/d of domestic sewage, treated with an AAO+MBR process, offering a replicable model for decentralised wastewater treatment overseas.

Iraq has a hot desert climate, with summer extremes frequently exceeding 45°C and frequent dust events. Municipal sewer networks are unevenly distributed, and domestic sewage from many communities, camps and industrial sites cannot be connected to centralised plants. Water resources are scarce, so effluent that can be reused for landscape irrigation is far more valuable than compliance alone.
At the outset, the owner set four hard requirements: a small footprint, fast delivery, heat resistance, and simple operation. Together with the climate, infrastructure and limited local O&M capability, these constraints ruled out the conventional "concrete tank plus activated sludge" approach.
The AAO process links anaerobic, anoxic and aerobic stages in series to achieve organic degradation with biological nitrogen and phosphorus removal. In the anaerobic zone, phosphorus-accumulating organisms release phosphorus while taking up readily biodegradable organics; the anoxic zone performs denitrification using influent carbon; the aerobic zone completes nitrification and excess phosphorus uptake, with phosphorus removed through waste sludge. This three-stage arrangement buffers the flow fluctuations typical of domestic sewage.
The MBR membrane module replacing the secondary clarifier is the key to this design. Mixed liquor suspended solids in the membrane tank can be maintained at 8,000–12,000 mg/L, giving a high biomass inventory and high volumetric loading — so the entire system achieves stable treatment capacity within a very small footprint. Membrane retention keeps effluent suspended solids and turbidity extremely low and removes pathogens effectively; after disinfection, the water can be used directly for landscape irrigation and road washing, closing a local wastewater-to-reclaimed-water loop. A long sludge age also means less excess sludge, significantly reducing pressure on localities that lack sludge disposal facilities.

The project uses three Zhongqiao box-type integrated units, each rated at roughly 50 m³/d and operated in parallel to reach the 150 m³/d total. Modularity provides elasticity: the owner can bring units online in stages according to actual occupancy or flow growth, avoiding the energy waste of oversized single-train operation, and future expansion needs no additional civil works.
Each unit integrates an equalisation tank, AAO biological section, MBR membrane tank, disinfection unit, blowers, chemical dosing and a PLC control cabinet. Prefabrication, piping connection and pressure testing are completed in the factory, so the unit arrives as a working system. Housings use anti-corrosion carbon steel with multi-coat protection — surface preparation, epoxy zinc-rich primer and topcoat — suited to hot, humid and saline conditions. For the desert climate, electrical components are selected with derating, the control cabinet is fitted with forced ventilation, membrane areas are shielded from direct sunlight, and housing joints are sealed against sand ingress.
The fourth container is a practical detail: membrane spares, cleaning chemicals, wear parts and special tools ship with the main units and are stored together. For overseas projects where spare-part lead times can run into months, this arrangement resolves the risk of downtime while waiting for parts up front, and gives site staff a dedicated space for spare-parts management.
After factory pre-commissioning, the units were shipped as complete containers, internally braced, with key components packed against moisture and salt fog. On site, construction work was reduced to a minimum: foundation levelling, unit placement, inlet and outlet piping connection, power connection, sludge seeding and commissioning. Compared with conventional cast-in-place tank construction that takes months, this project went from arrival to treated effluent in a matter of weeks.
Zhongqiao Enlightenment dispatched technicians to guide installation and commissioning on site, supported by English drawings, operation manuals and remote video assistance, and provided hands-on training so the owner's staff could run the system independently after handover.

Since commissioning, the system has run stably with clear effluent; COD, ammonia nitrogen and suspended solids meet local discharge requirements, and part of the treated water is reused for site irrigation. The PLC system automatically adjusts blowers and pumps according to tank level, dissolved oxygen and membrane flux, and the remote monitoring module lets the owner view operating data and receive alarms on a mobile device. Routine work requires only one or two part-time staff for inspection and membrane cleaning.
"The unit is installable on arrival and usable once installed — that is what matters most to us," said the owner's project manager. "In Iraq, waiting for spare parts and waiting for technicians often costs more than the equipment itself."
Three lessons emerge from this project. First, factory-prefabricated container delivery moves on-site uncertainty back into the factory and is an effective way to compress schedules abroad. Second, redundancy in process and structure — membrane tank volume, heat dissipation capacity, corrosion grade — is a necessary investment against high temperatures and fluctuating influent. Third, shipping spares and chemicals with the equipment directly determines availability when the supply chain is far away.
Zhongqiao Enlightenment will continue to advance modular, climate-resilient and intelligent design, delivering integrated wastewater treatment systems better suited to conditions across the Middle East, Southeast Asia, Africa and South America.