Seamless-Corner Integrated Sewage Treatment Equipment with Dual Recirculation and PLC Based Control With Remote Monitoring for Integrated Wastewater Treatment Plant
Flat integrated sewage treatment equipment
,H-BOX seamless-corner wastewater plant
,Integrated sewage treatment equipment
The flat integrated sewage treatment equipment, also known in the industry as conventional integrated equipment, is the most widely applied product line in Zhongqiao Enlightenment's decentralized wastewater portfolio. Its proposition is straightforward: controlled cost, simple production and a short construction period. For budget-sensitive, schedule-driven and volume-procured projects — clustered village programs, industrial park utilities and upgrades — this format is often a better fit than a premium custom enclosure.
"Flat" describes how the body is built: flat steel plates combined with a section-steel frame form a regular box with high internal volume efficiency, which makes it easy to arrange multiple biological compartments. Building on that base, Zhongqiao Enlightenment developed the H-BOX flat integrated unit, protected by design patent 202230504688.2, with the main structure covered by patent ZL 2021 2 0165796.1.

The weak point of a conventional flat tank is usually the four corners. After bending, those corners need welded seams, and under sustained full-water and backfill pressure a seam becomes the starting point for leakage and corrosion. H-BOX removes the seam: the corners are designed as continuous, integrally formed transitions, so load distribution is more even and pressure resistance improves noticeably.
Internal reinforcing ribs resist lateral water pressure. The unit can be buried more than 2 meters deep; once backfilled, the surface above the equipment can be used for greening or other purposes. No separate equipment house is required, and no additional heating or insulation structure is needed for the tank itself. For rural programs this matters: one less building means less land acquisition, fewer approvals and lower operating burden.
Odour is the most frequent complaint about buried plants. This series uses two measures together: conventional high-altitude exhaust that carries collected off-gas upward for dispersion, and soil deodorization, in which the backfill layer and soil microorganisms adsorb and degrade odour components. Combined, the two are closer to what residents near a site actually experience than a taller stack alone.

Each unit is equipped with two recirculation systems: mixed liquor return and sludge return. Their ratios are adjusted independently according to changes in water quality. Mixed liquor return performs denitrification by carrying nitrified liquor from the aerobic zone back to the anoxic zone, where it supplies electron acceptors. Sludge return maintains the bacterial population so the biological system keeps working through flow and load fluctuations. Separating the two loops gives operators a better chance of finding a stable operating point across seasons and loading conditions.
The platform accepts AO, AAO, AO+MBR, AAO+MBR, fiber spinning disc and MBBR combinations. Process route, unit dimensions and burial depth are all customizable. Owners may choose a conventional settling-based separation stage or a membrane stage when suspended solids need to be tightly controlled.
|
Parameter |
Influent |
Grade A effluent |
Grade B effluent |
|
COD (mg/L) |
≤500 |
≤50 |
≤60 |
|
BOD (mg/L) |
≤350 |
≤10 |
≤20 |
|
Ammonia nitrogen (mg/L) |
≤45 |
≤5 (8) |
≤15 (8) |
|
pH |
6.0–9.0 |
6.0–9.0 |
6.0–9.0 |
|
Suspended solids (mg/L) |
≤270 |
≤10 |
≤20 |
|
Total phosphorus (mg/L) |
≤5 |
≤0.5 |
≤1 |
Cost and schedule come first. Flat construction uses straightforward materials and fabrication, so material cost and labour hours stay controllable; factory prefabrication then shortens civil works and site installation.
Structural pressure resistance is the second gain. Seamless, integrally formed corners plus internal ribs improve resistance to deformation under buried and full-water conditions, reducing the risk of later leakage.
Surface reuse is the third. With burial beyond 2 meters, backfill above the tank supports planting, walkways or other uses, and no above-ground plant room is needed.
Odour control is more complete. High-altitude exhaust combined with soil deodorization suits sites close to housing, schools or clinics.
Operation is adjustable. Independent mixed liquor and sludge return, together with customizable depth and compartment ratios, let operators tune the process to actual water quality.
Expansion is feasible. The modular approach allows additional treatment units or a revised process combination for tighter standards or higher flow, without demolishing the original installation.

The flat integrated series treats comprehensive domestic wastewater and similar organic wastewater. Typical applications include clustered village and township programs, residential communities, schools, clinics, office buildings, hotels, scenic-area service points, industrial park domestic utilities, food markets, and livestock or food processing facilities requiring compliant discharge. For programs procuring in volume with unified appearance and maintenance, the standardization of the flat series is an advantage.
Selection requires treatment flow, influent quality, effluent standard, installation mode and burial depth. The body, coating, electromechanical package and piping are completed in the factory; the unit ships as a whole, is lifted into place, then connected, electrically hooked up and commissioned unit by unit. Zhongqiao Enlightenment provides process design, manufacturing, export packing, installation guidance and remote O&M support.
Founded in 2013 as a national high-tech enterprise, the company holds 18 invention patents, more than 60 utility model patents and 27 software copyrights, along with CEP certification and ISO quality, environmental and occupational health and safety management system certification, plus energy management system certification. Two production bases cover over 40,000 m² with annual output above 800 integrated units. Products have been exported to the United States, Mexico, Russia, Saudi Arabia, Iraq, Romania, Indonesia, the Philippines, Pakistan, South Korea, France, Peru, New Zealand, Ethiopia, Rwanda, Myanmar and Malaysia.
How does the flat series differ from the Zhongqiao Box?
Both belong to the carbon steel family. The flat series emphasizes cost control, simple production and short schedules, which suits volume and standard projects. The Zhongqiao Box emphasizes premium customization, appearance and climate-adaptation options for projects where image and branding matter.
Does burial beyond 2 meters complicate maintenance?
Access manholes, ladders and lifting space are reserved at the design stage. Backfill depth, groundwater level and maintenance access are confirmed together in the proposal.
How are the seamless corners achieved?
The four corners use an integrally formed structure with continuous transitions, so pressure is not carried by welded seams. This lowers the risk of corner leakage and corrosion.
How is effluent stability ensured?
Through independent dual recirculation, well-divided biological compartments and an optional membrane stage. Where ammonia nitrogen and suspended solids limits are strict, AO+MBR or AAO+MBR is recommended.
Send us your daily flow, influent parameters, effluent standard and site conditions, and we will complete process selection, configuration and quotation.


Efficient and Stable Zhongqiao Box Integrated Sewage Treatment Equipment for domestic Wastewater treatment
Skid Mounted Integrated Containerized Sewage Treatment Plant Equipment MBR System For Municipal Industrial Use
Durability And Corrosion Resistance PP Material Sewage Water Treatment Plant Integrated