GW Type Air Flotation Machine with 1-500t/h Capacity and 25-40 Micron Microbubbles for Dissolved Air Flotation Unit
GW Type Air Flotation Machine
,1-500t/h Capacity DAF Machine
,25-40 Micron Microbubbles Dissolved Air Flotation Unit
The GW type air flotation machine (patent No. ZL 202120168243.1) is a dissolved air flotation unit built for industrial wastewater and municipal sewage. Its defining idea is to move air dissolution inside the pump: the unit pressurises and mixes air and water while it is drawing water in, producing microbubbles of 25–40 microns that capture suspended solids, coagulation flocs and oily matter.
A conventional dissolved air system depends on four components working together — a recycle pump, an air compressor, a jet generator and a dissolved air tank. The GW type replaces that chain with a single gas-liquid mixing pump. Piping is shorter, joints are fewer and inspection points are concentrated, so the skid is compact and can be commissioned as soon as it is lifted into place.

Step 1: pressurised dissolution. The gas-liquid mixing pump draws treated clear water back from the tank. A negative pressure forms at the suction port, so air enters the pump chamber together with the liquid. The high-speed rotary cutting impeller shears the mixture and the gas dissolves under pressure. By adjusting operating conditions and the gas-liquid mixing ratio, either highly dispersed microbubbles or maximum gas-carrying capacity can be obtained; the gas content of the liquid reaches up to 30%, depending on pump specification.
Step 2: instant release. Saturated, even supersaturated, dissolved water enters the automatic gas-liquid separation tank to stabilise, then passes through the release device. The pressure drops instantly and dense 25–40 micron microbubbles are set free.
Step 3: contact and flotation. Raw wastewater enters the flotation tank and mixes thoroughly with the dissolved air recycle stream before entering the contact zone. Flocs formed by chemical coagulation attach to the microbubbles, which carry the pollutants up to the surface.
Step 4: sludge scraping and discharge. Floating solids are removed continuously by a scraper travelling the whole liquid surface, pushing sludge from the inlet end to the outlet end of the tank. The scraper lifts the sludge onto an inclined metal plate and into the floating sludge discharge trough. Purified water leaves through the outlet pipe, where a liquid level adjustment device sets the height of the sedimentation and flotation zone.
-
Fine bubbles. 25–40 micron bubbles offer a large specific surface area, giving fuller capture of fine flocs and emulsified oil and a more stable effluent.
-
Simplified construction. The recycle pump, air compressor, jet generator and dissolved air tank are all eliminated, so rotating parts and wear items are fewer, together with the number of failure points and spare-part types.
-
Self-regulating dissolved gas system. The dissolved gas system of the separation tank adjusts automatically, runs stably and needs only “one minute” for commissioning.
-
Frequent start and stop. The unit can be switched on and off repeatedly without re-commissioning, which suits batch production, multi-shift operation and sites with fluctuating water quality.
-
Integrated layout. Tank body, dissolved gas system, scraping mechanism and ladder platform share one base, cutting transport, lifting and installation costs.
The GW type suits municipal wastewater and suspended solids removal, coagulation floc separation and oil-water separation in papermaking, chemical, beverage, printing and dyeing, textile, oil refining, electroplating, food, slaughter and leather industries. For oily wastewater and the grease and colloids found in wool-scouring and slaughterhouse effluent, flotation normally serves as pretreatment ahead of biological treatment and reduces the load on downstream units. In printing and dyeing effluent it also helps with colour and colloidal matter, not only suspended solids.

-
Size for peak flow with 10–20% margin, so that sludge does not spill over at high water levels.
-
Where oil content and suspended solids are high, run at maximum gas-carrying capacity, or install two flotation stages in series.
-
Upstream coagulation decides flotation performance: PAC and PAM dosing points, reaction time and floc size must match the release device.
-
Set the scraping cycle according to sludge thickness; if the float is too wet, shorten the interval and reduce scraper speed.
-
Check the release device routinely. Larger bubbles and a thin float usually mean it needs cleaning or replacement.
-
For intermittent duty, drain the dissolved gas tank and piping after shutdown to prevent scaling and blockage.

In short, the GW type fits sites where footprint is tight, operation is intermittent and maintenance manpower is limited: four conventional components are condensed into one pump, and fewer parts mean easier daily upkeep.
Efficient and Stable Zhongqiao Box Integrated Sewage Treatment Equipment for domestic Wastewater treatment
Skid Mounted Integrated Containerized Sewage Treatment Plant Equipment MBR System For Municipal Industrial Use
Durability And Corrosion Resistance PP Material Sewage Water Treatment Plant Integrated