Modular Containerized Sewage Treatment Plant for Fast Installation in Domestic and Industrial Wastewater Projects
Modular Containerized Sewage Treatment Plant
,Fast Installation Packaged Sewage Treatment Plant
,Domestic and Industrial Wastewater Containerized Plant
The containerized packaged sewage treatment plant attacks the most expensive and least controllable part of a wastewater project: civil works. Zhongqiao Enlightenment integrates screening, equalization, biological treatment, settling, disinfection and control into a corrugated steel enclosure, fabricates and trial-runs it in the factory, and ships it ready for pipe and power connections on site.
The plant serves both domestic sewage and industrial wastewater from 10 to 500 m³/day, with modular parallel configurations and fully automatic control as standard. Typical order-to-water time is 35 to 45 days, of which on-site installation takes only 3 to 7 days.

Packaging is not a marketing word; it maps to three concrete delivery forms.
|
Level |
Delivered content |
Site work |
Where it applies |
|
Whole-unit |
Single enclosure with all process stages inside |
Levelling, piping, power |
Below 200 m³/day, single source |
|
Packaged set |
Main tank plus separate equipment room (blowers, controls, dosing) |
Foundations, piping, cable trays |
100 to 300 m³/day, service access needed |
|
Modular |
Two or three parallel modules with shared pipe gallery |
Foundation group, module tie-ins, linked commissioning |
200 to 500 m³/day, phased expansion |
The division follows transport and lifting limits: beyond twenty metres, road freight and lifting costs rise sharply, so the range switches to parallel modules, each sized as an independently shippable unit. For phased projects the value appears in year two — capacity grows by adding one module, and the existing system never shuts down.

Side walls and roof are corrugated steel. Pressed into a wave, the same plate thickness gains a multiple of its section moment of inertia, so a thinner sheet achieves the strength of stiffened flat plate — lighter tank, fewer welds, lower sea freight and lifting cost.
The company runs its own 10 mm corrugating press for vertical and horizontal profiles: vertical corrugation resists lateral pressure and suits buried tanks; horizontal corrugation resembles a standard container and suits above-ground installation. Appearance and structure are patented (ZL 201922488596.5).
One misconception to clear up: "containerized" describes the panel language, not the dimensional limits of an ISO box. Held to the 2.35 m internal width of a 20 or 40 ft box, anything above 50 m³/day would have to ship in sections and be joined on site, adding joints and leak paths. The practical approach sizes the enclosure to the process and ships it in open-top, flat-rack or break-bulk arrangement.
Process is not constrained by the panel type; the same body holds different configurations:
|
Option |
Choices |
When it applies |
|
Process route |
A/O, A2O, A/O+MBR, MBBR |
Grade B on A/O; Grade A or reuse on MBR routes |
|
Installation |
Above ground, buried, semi-buried |
Buried saves surface space; above ground eases service |
|
Equipment room |
Integrated or separate |
Integrated is compact; separate eases service and dosing |
|
Equalization |
Internal or external tank |
Internal shortens piping where flow varies |
|
Disinfection |
UV, sodium hypochlorite, slow-release |
Reuse or discharge to sensitive waters |
Fast installation is not one thing done quickly; it is compressing the on-site share of the total schedule. Take a 100 m³/day whole-unit plant:
|
Phase |
Days |
Work |
Responsible |
|
Fabrication and trial running |
1–25 |
Panel forming, equipment fit-out, hydrostatic test, powered trial |
Manufacturer |
|
Transport |
26–32 |
Shipment to site (varies with distance) |
Both |
|
Foundation and setting |
33–35 |
Foundation acceptance, lifting, levelling |
Installer |
|
Connections |
35–37 |
Inlet and outlet piping, power, instrumentation |
Installer |
|
Commissioning |
38–45 |
Clean-water trial, seeding and acclimatisation, stepwise loading |
Both |
Against twelve to eighteen months for a conventional concrete plant, the packaged approach reduces on-site construction to two deterministic actions: pour one bearing slab and reserve pipe and power tie-ins. For projects without a specialist contracting workforce — overseas mining camps, island resorts, temporary resettlement — that is often worth more than the price difference on the equipment itself.
Seeding and acclimatisation inside commissioning depend on water temperature and extend in cold seasons; the production plan should allow for this.

|
Wastewater type |
Quality profile |
Pre-treatment and configuration |
|
Domestic (residential, hotel, office) |
COD 300–500, readily biodegradable |
Standard configuration, screen plus equalization |
|
Restaurant and canteen |
High fats and oils, clogs aeration |
Grease trap up front, larger equalization |
|
Food processing |
High organic load, shift-driven flow swings |
DAF pre-treatment, MBBR for shock loads, longer retention |
|
Laundry and dyeing |
Surfactants, high colour |
Coagulation-sedimentation up front, foam control, dosing for decolourisation |
|
Slaughterhouse and livestock |
Blood protein, high ammonia and oils |
Screen, grease trap and DAF, two-stage biology |
An industrial connection must start with a water quality analysis — the one prerequisite that cannot be waived. The same enclosure treating domestic sewage and food wastewater differs in retention time, aeration intensity and return ratios, not in the tank itself. Establishing the water quality before fixing the process is far cheaper than fixing the process first and arguing with compliance afterwards.
|
Model |
Capacity (m³/d) |
Dimensions (mm) |
Operating weight (t) |
Installed / running power (kW) |
Cost per m³ (CNY) |
Footprint (m²) |
|
MBR-0.5 |
10 |
3440×1090×2160 |
9.45 |
5.37 / 3.25 |
2.04 |
20.75 |
|
WSZ-2 |
50 |
6125×2030×2660 |
37.32 |
5.88 / 3.31 |
0.54 |
39 |
|
MBR-2.5 |
60 |
6360×2040×2660 |
38.56 |
7.87 / 4.55 |
0.67 |
39.97 |
|
MBR-6 |
150 |
11230×2540×2860 |
89.20 |
18.82 / 11.07 |
0.61 |
67.40 |
|
WSZ-8 |
200 |
15469×3060×2860 |
146.29 |
9.75 / 6.00 |
0.41 |
92 |
|
MBR-12.5 |
300 |
9780×2930×2860 (two units) |
178.40 |
26.25 / 15.45 |
0.45 |
117.81 |
MBR models deliver Grade A or reuse-grade effluent, WSZ models Grade B. Widths are held between two and three metres and heights between 2.16 and 2.86 metres, balancing transport limits against internal service access. Above 300 m³/day the range switches to two parallel units, each still an independently shippable module.
Four project types reach for the containerized packaged plant first. Island and coastal resorts, where sites are dispersed, water and maintenance resources are scarce, and remote diagnosis with unmanned operation is a requirement. Mining, oilfield and construction camps with three-to-five-year project lives, where the unit must be relocatable — moved as a complete lift to the next site.
Emergency and temporary installations — post-disaster resettlement, event wastewater — where commissioning and demobilisation must both be fast. And overseas municipal and EPC projects, where whole-unit shipment and rapid setting can take environmental acceptance off the project's critical path.
What these projects share is the absence of a stable operating team and the impossibility of months of civil works. The supplier's answer is to turn operation into a remotely diagnosable service package: level, blower current, transmembrane pressure and effluent flow transmitted to the cloud platform, most anomalies characterised before dispatch, and annual inspection replacing resident operators.
For cross-border and remote delivery, risk concentrates in interfaces, not fabrication. Power supply follows the destination country — voltage, frequency and plug standards on the control panel. Discharge standards follow written limits from the local environmental authority, never a transplanted Chinese figure.
Membrane modules, diffusers and mechanical seals are wear items; one spare set with the first order prevents most early downtime. Material certificates, weld inspection, coating thickness, pressure test and electrical test records are compiled during production.
The series holds China Environmental Protection Product Certification (CCAEPIEP-2023-1218), and the company operates certified quality, environmental, occupational health and safety, and energy management systems — a direct basis for acceptance documentation.
For the buyer, the containerized packaged plant turns wastewater treatment from an engineering project into an equipment purchase: design, fabrication, water testing and documentation all happen in the factory, leaving foundations, connections and power as the only site variables.
Fewer variables mean less uncertainty in schedule and compliance — which is why this product category is growing in both the domestic and industrial markets.


Efficient and Stable Zhongqiao Box Integrated Sewage Treatment Equipment for domestic Wastewater treatment
Skid Mounted Integrated Containerized Sewage Treatment Plant Equipment MBR System For Municipal Industrial Use
Durability And Corrosion Resistance PP Material Sewage Water Treatment Plant Integrated