Custom DAF Unit: Dissolved Air Flotation for Food, Slaughter & Printing Wastewater
No two wastewater streams are alike. Food-processing effluent carries fats, oils and high organic load; slaughterhouse wastewater mixes blood proteins, hair and paunch contents; printing and dyeing effluent is known for deep colour and violent swings in flow and quality. Put the same "standard DAF unit" into these three streams and the results can differ dramatically.
The logic of the Custom DAF Unit starts from water analysis and aligns material, size, technology configuration and chemical route to the actual stream — the equipment adapts to the wastewater, not the other way round. Zhongqiao Enlightenment operates two production bases totalling 40,000 m² with an annual capacity of 800 units.
The flotation range spans YW-3 to YW-200, with the GW and YW models protected by patents (ZL 202120168243.1, ZL201620927225.6). Core technologies — shallow-tank principle, inclined-tank high-pressure dissolution, anti-clogging releaser, tubular reactor — are optional modules from which project-specific configurations are derived, turning standard models into industry-tailored solutions.

|
Wastewater type |
Pollutant profile |
Core difficulty |
DAF's role |
|
Food-processing |
Animal/vegetable fats, high BOD, suspended fruit and grain particles |
Oil-bound solids clog pumps and piping |
Oil and SS removal after grease separation, protecting biology |
|
Slaughterhouse |
Blood proteins, fats, hair, paunch contents; high COD/BOD/SS |
Stable colloidal proteins; hair entangles equipment |
Flocculation-flotation sharply cuts SS and grease ahead of biology |
|
Printing / dyeing |
Dye colloids, auxiliaries, strong colour, fluctuating pH |
Stubborn colour; day-night load swings |
Chemically assisted flotation for colour and colloid removal, buffering shock loads |
Each stream calls for a different chemical route: food and slaughterhouse effluents rely on calcium or iron salts to destabilize colloids, then PAM to build large flocs; printing effluent typically combines a decolorizing agent with a coagulant, and online pH adjustment (the tubular reactor supports intelligent pH control) is the precondition for colour removal.
Catalogue reference data show colour removal of about 40 percent and SS removal of 70 percent for dyeing wastewater; slaughterhouse effluent is not listed separately, but its grease and solids profile sits in the same high-efficiency band as edible-oil wastewater (85 percent SS removal) and papermaking effluent — actual removal rates must be confirmed by jar tests, and no figures in this article should be read as a guarantee.
First, material. Food and slaughterhouse applications demand higher hygiene and corrosion resistance, so wetted parts can be upgraded to stainless steel; conventional industrial duty uses anti-corrosion carbon steel to control cost. Second, technology configuration.
High-SS streams (slaughterhouse, fruit and vegetable washing) get the anti-clogging releaser and inlet-side reverse scraping; high-colour streams (printing and dyeing) get inclined-tank high-pressure dissolution and the tubular reactor to secure bubble density and chemical mixing; space-tight sites add the shallow-tank principle with inclined tubes to compress the footprint.
Third, structure and installation: base-mounted as a whole unit, custom-sized and shipped in sections for on-site assembly, or integrated with equalization tank and dosing room into one skid. Fourth, control: from manual operation to fully automatic PLC interlocking (level, dissolution pressure, scraping, dosing), matched to the client's operating capability.
Customization is not a new product line — it is configuration within the same model range and patented technologies, and manufacturing standardization is what keeps delivery times and quality intact.

Food processing: screening for coarse solids → grease separator for free oil → DAF for emulsified oil and suspended solids → biological treatment for dissolved organics → settling and discharge.
Slaughterhouse wastewater is the strongest of the three and its typical train is longer: coarse and fine screens with a hair collector → equalization tank → DAF (blood proteins flocculated and floated off) → hydrolytic acidification → aerobic biological treatment → disinfection and discharge; DAF's job there is to cut SS and grease so the acidification stage does not choke on scum.
Printing and dyeing: equalization → chemically assisted DAF for colour and colloid removal → biological degradation → polishing for reuse or compliant discharge. In all three trains DAF stands ahead of the biological stage — the catalogue notes that DAF effectively addresses sludge bulking, and steady pre-treatment is the precondition for a steady biological stage.
Combined with Zhongqiao Enlightenment's integrated sewage treatment equipment (WSZ/MBR series), DAF is delivered as the front unit of a complete line with interfaces pre-adjusted in the factory.
|
Model |
Dimensions (mm) |
Total power (kW) |
Scraper power (kW) |
Dissolved air tank |
Dead weight (t) |
|
YW-5 |
3460×1900×2100 |
4.47 |
0.37 |
DN400×1000 |
1.8 |
|
YW-10 |
4460×2000×2100 |
5.05 |
0.55 |
DN400×1000 |
2.2 |
|
YW-30 |
6960×2700×2300 |
6.75 |
0.55 |
DN600×1880 |
3.6 |
|
YW-50 |
9060×2950×2550 |
11.35 |
0.55 |
DN600×1880 |
5.7 |
|
YW-80 |
11860×3200×2850 |
16.50 |
1.10 |
DN600×2100 |
9.2 |
|
YW-100 |
14360×3200×2850 |
18.10 |
1.10 |
DN800×2100 |
11.2 |
|
YW-200 |
17360×3700×3100 |
32.20 |
2.20 |
DN800×2100 |
13.4 |
Unit basis to verify with the factory before quoting: the catalogue labels capacity in m³/day while the same rows list dissolved air water flow in m³/h (YW-100 corresponds to 46 to 50 m³/h); cross-checked, the capacity column is more likely an hourly figure.
Sizing patterns differ by industry: food plants size to production-line flow, slaughterhouses to peak flow derived from per-shift slaughter volume (peak-hour sizing with margin recommended), printing plants to dye-batch cycles balanced against equalization capacity. Projects beyond the standard range can be extended by parallel units based on YW-200.
A custom project advances in order: the client provides a water analysis report or raw sample → the factory runs jar tests to fix the chemical route and dosing ratio → a selection proposal is issued (model, material, technology configuration, control mode, process layout) → production starts after both parties confirm.
Jar testing cannot be skipped: protein flocculation for slaughterhouse effluent and decolorizing agent screening for printing effluent depend on test data, not empirical formulas. After commissioning, dosing and reflux parameters continue to be trimmed with the seasons and production volumes; automatic models can hold two time-segmented parameter sets for day-night load differences.
The essence of customization is absorbing the uncertainty of water quality at the front of the project — run the jar tests first, and DAF's position and specification in the process train settle themselves.

Efficient and Stable Zhongqiao Box Integrated Sewage Treatment Equipment for domestic Wastewater treatment
Skid Mounted Integrated Containerized Sewage Treatment Plant Equipment MBR System For Municipal Industrial Use
Durability And Corrosion Resistance PP Material Sewage Water Treatment Plant Integrated